Strong Adhesive Material We make our gum tape using cloth material to improve the adhesive power. When you bind your books with it, you are sure it will hold in place for a long time. Multicolored We understand that book covers vary in colors; thus, tapes come in green, blue, black, yellow and red. Your books will look beautiful after you bind them. For other colors please check more products in our Daraz store. Tear-Proof Cloth We only use high quality that is tear-resistant to increase the life of every bind you make. How to Achieve Best Result 1. Make sure the surface you are applying the tape to is completely dry and free of any debris before the tape is applied. 2. Unwind the tape from the roll. Try to immediately bond the tape to the surface without entrapping air between the tape and the surface. 3. Use some application pressure to achieve maximum bond strength. Make sure there is no gapping remaining between the tape and the surface it is being applied to which would allow water to come into contact with the adhesive side of the tape over time. 4. If the tape has an acrylic adhesive the dwell time the tape needs to be in contact with both surfaces (before it reaches it maximum adhesion) is typically 1 to 24 hours. For best results during this dwell time try to provide some application pressure (e.g. clamps, tape over it, etc.) 5. For even better adhesion you can also use an adhesion promoter or