Importer-Stockist-Supplier

Category: Non Destructive Testing

Showing all 11 results

  • In visible light part of the spectrum above 450 nm (all colors but violet) pass 80% to 85% of the light
    to the eye, and thus allow fluorescent indications to be easily seen. While the eye can tolerate
    substantialexposure to 365 nm black light without harm, modern black light inspection practices
    often use intensities that are potentially harmful, if the light beams are reflected into the eyes by
    shiny surfaces for more than adozen minutes a day.

    Read more
  • AccuPro TM Plus

    AccuPRO COMPONENTS
    • Unpack and inspect the component(s) for possible
    damage in shipment. Save the shipping carton
    and packing materials for future storing or shipping
    of the AccuPRO components.
    • Assure the sensor cable is undamaged and
    securely attached to the readout unit.
    • Conduct a performance test as soon as possible.
    If any damage is noted, immediately notify the
    carrier and supplier (do not use the instrument).
    • While charging, it is recommended to have the
    device turned OFF.

    Read more
  • Cleaner NABAKEM

    680.00

    Cleaner NABAKEM (KOREA) is an NDT-approved solvent cleaner/remover for pre-cleaning before non-destructive testing (NDT)… Ideal Application

    Non-destructive testing pre-cleaning,

    Post inspection & Pre Inspection….

    Penetrant Testing …

    Add to cart
  • Cleaner SKC-S Magnaflux

    1,280.00

    Cleaner SKC-S is an NDT-approved solvent cleaner/remover for pre-cleaning before non-destructive testing (NDT)… Ideal Application

    Non-destructive testing pre-cleaning,

    Post inspection & Pre Inspection….

    Penetrant Testing …

    Add to cart
  • Developer NABAKEM

    680.00

    Solvent Based Developer. A bright white, non-aqueous developer, MEGA CHEK DEVELOPERMega check Developer ENG(2) creates an opaque white background for high-contrast penetrant testing and quickly draws penetrant out to create stronger, clearer indications for better inspection reliability and sensitivity.

    Add to cart
  • Developer SKD-S2 Magnaflux

    1,330.00

    Solvent Based Developer. A bright white, non-aqueous developer, SPOTCHECK  DEVELOPER creates an opaque white background for high-contrast penetrant testing and quickly draws penetrant out to create stronger, clearer indications for better inspection reliability and sensitivity.

    Add to cart
  • Magnetic Field Indicator

    The Magnaflux® Magnetic Field Indicators, also known as gauss meters or magnetometers, are used to check residual magnetism after magnetic particle testing. They read the amount of residual magnetism left in a part quickly when the indicator arrow is placed against a magnetized part.

    Read more
  • Penetrant SKL-SP2

    1,330.00
    • Solvent removeable
    • ISO 3452 sensitivity level #2[EG1]
    • Can be used for Method B, Method C and Method D
    • Simple, easy-to-use process
    • Vivid, high-contrast red color
    • Superior flaw resolution
    • Good surface wetting
    • Optimized capillary action
    • Works in visible light
    • Very low toxicity
    • Low odor
    • NDT-spec compliant
    Add to cart
  • Safe Light (Dark Room Light)

    4,000.00

    safelight is a light source suitable for use in a photographic darkroom. It provides illumination only from parts of the visible spectrum to which the photographic material in use is nearly, or completely insensitive

    Add to cart
  • UV Lamp EV6000 Magnaflux

    BENEFITS
    Minimizes time to inspect parts
    • Speeds up inspection time with one of the
    widest, most even beams on the market
    • Indications are clearly visible even at the
    edge of the 9 inch / 23 cm beam, thanks
    to the high intensity LEDs
    Maximize range of inspections
    • Use for virtually any fluorescent penetrant
    or mag particle inspection
    • Inspect a wide range of components,
    including aerospace parts, without worry
    • Full NDT specification compliance, including
    ASTM E3022, RRES 90061, and AITM6-1001
    Increases real-world reliability
    • Reduces on-the-job downtime with
    dependable, reinforced construction
    • Fully sealed IP65 rate

    FEATURES
    • 9 in / 23 cm wide, uniform beam
    • No hot-spots in the beam profile
    • IP65 rated, rugged, durable design
    • No internal fan
    • Low energy consumption
    • Aerospace prime and OEM certified
    • Certified to ASTM / RRES / AITM
    SPECIFICATION COMPLIANCE
    • ASTM E2297
    • ASTM E3022
    • ISO 3059
    • RRES 90061

    Read more
  • YOKE Magnaflux UK

    Magnetic Particle Inspection Yokes. Magnaflux magnetic particle inspection (MPItesting yokes are designed to be fast and reliable. … Find out more about how Magnaflux inspection equipment is designed to find indications and defects like fatigue cracks in ferrous materials through wet or dry method mag particle testing.

    Read more
×

Hello!

Click one of our contacts below to chat on WhatsApp

× How can I help you?